Close



Results 1 to 3 of 3
  1. #1

    X-Max connectivity

    Hi All,

    This is my first 3d printer and I can't seem to connect. The WiFi screen on the machine shows an IP address of 0.0.0.0. Tried connecting the LAN cable and nothing and then went straight to the USB drive and nothing is showing up in the print menu. Watched about an hour on YouTube but I'm still not there.
    All help is greatly appreciated.

    Collins (FNG)

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,801
    you need to connect it to your wifi network.
    You won't get a valid ip address until you do.

    Somewhere in the setup menu there should be a network setup option.

    Likewise with a lan cable all you should need to do is tell it to use wired lan (should be more reliable anyway).

    What does the 'manual' say ?

    did you try this ?
    https://www.qd3dprinter.com/videos/x-max/
    scroll to last video on page
    Last edited by curious aardvark; 04-19-2020 at 02:26 PM.

  3. #3
    Many thanks. I will give that a try once I'm in the shop.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •