Results 1 to 10 of 13
Hybrid View
-
04-26-2020, 09:01 PM #1
- Join Date
- Apr 2020
- Posts
- 6
I can shave off some of the material on top the indentation and may be also shrink them away from the corners. Thanks for the tips. I will post back with updates to close this thread. In the meantime if you have any other feedback on my design, please feel free to share. Thanks again Internet stranger for your kindness and help.
-
04-26-2020, 09:10 PM #2
I like the design.
I would taper the top edge a little, then give a rounded area to allow a smooth transition into the half round area.
Kind of a tapered S curve into the locked half round seat.
-
04-27-2020, 01:49 PM #3
- Join Date
- Apr 2020
- Posts
- 6
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion