Results 1 to 10 of 13
Threaded View
-
04-26-2020, 08:45 AM #2
I too did this following tutorials and Printer this Snap together case.
New Case Layout.jpg
I created both parts and using Fusion 360 these part are created in the same layout though they are separate from one another.
I can use one model to help me shape the other model. thereby allowing me to size and correctly postilion parts.
I designed my Case from known specs like per-positioned standoffs and size of circuit PCB.
Then I searched many tutorials to learn how to accomplish each and every single step of the process until completion.
Blue Case.jpg
I should have added the Fan Screw Holes, As you can see on this case I drilled them incorrectly.Last edited by Roberts_Clif; 04-26-2020 at 08:55 AM.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion