Results 1 to 1 of 1
Thread: z-axis consistant gap
-
04-24-2020, 02:05 PM #1
- Join Date
- Jul 2015
- Posts
- 19
z-axis consistant gap
Hello,
I have a powerspec 3d pro but figured its close enough to the FFCP that someone here will know. I have a consistent issue on my z-axis where I'll get a gap/slight shift regardless of model/temp/filament. See attached pic. Looking for advice on if its adjustment I need to make or buy a new z-axis motor/rod all together. Any advice is appreciated.
thanks for taking the time to read
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion