Results 1 to 6 of 6
Thread: Calibration woes
Threaded View
-
04-17-2020, 10:08 AM #3
what slicer are you using - could well be the x &y steps need adjusting.
And bear in mind that abs shrinks quite a lt. So always calibrate with good pla. Really cheap pla can have a little shrinkage.
And a tenth of a mill on a cheap machine isn't bad.
Also make sure you're not squeezing too hard on the calipers :-)
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help