Results 1 to 8 of 8
Threaded View
-
04-15-2020, 08:34 AM #2
Hello Mini
I looked at your Stl model I loaded it into Cura 15.04.6 an came up with a little over 4 hours 10 minutes to print the Model.
An then just for giggles loaded it into Cura 4.0.3 an came up with a print time of 3 hours 43 minutes to print the Model.
In total Cura 4.0.3 would have saved me about 1/2 hour of printing.
You may want to check the settings on your slicer.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion