Results 1 to 5 of 5
Thread: Is this a leveling issue??
-
04-11-2020, 07:29 PM #1
- Join Date
- Apr 2020
- Posts
- 5
Is this a leveling issue??
Hello,New to the site, I have been printing in school for about a year now, with schools closed I purchased an ender 3 pro and so far I am loving it. I have done about 6 prints and on my current print I am noticed about half way through the part is no longer sticking to the plate.I was thinking maybe I could simply re level the plate after the print finished and see if that fixes the problem, but was curious if maybe this is because the temperature is off or if anyone else has had a similar issue.I am printing with PLA around 205 degrees which was recommend for this type of filament. Any feedback is appreciated! I look forward to learning meeting some people here!I would post an image but for some reason it will not allow me too, oh well!Happy Printing!
-
04-11-2020, 07:38 PM #2
- Join Date
- May 2018
- Posts
- 566
take look though here https://3dprintboard.com/search.php?searchid=6544273
and here https://3dprintboard.com/search.php?searchid=6544288
-
04-11-2020, 07:39 PM #3
- Join Date
- Apr 2020
- Posts
- 5
Thank you!
-
04-11-2020, 08:16 PM #4
- Join Date
- Apr 2020
- Posts
- 5
It is only lifting up on the far left side of the print. The middle and right side and laying perfectly. It even seems to be printing fine, but for quality and learning purposed I would love for this not to happen!
-
04-21-2020, 12:05 PM #5
- Join Date
- Apr 2020
- Posts
- 1
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help