Results 1 to 10 of 10
Threaded View
-
04-09-2020, 08:39 AM #2
There are several reasons that can cause this.
1. The linear bearings could have debris causing them to miss steps.
2. The Smooth rods are lubricated with a grease instead of a light machine oil
3. The smooth rods and bearing are binding due to not being correctly aligned.
4. The stepper motor Driver module TMC2208 needs the V-Ref adjusted.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion