Results 1 to 9 of 9
Thread: Help fixing mirrored prints
Threaded View
-
04-06-2020, 03:46 PM #4
If home is Left Front then X-Axis end stop is an max, Y-Axis is at min
From what you posted I believe all you have to do is.
// Direction of end-stops when homing; 1=MAX, -1=MIN
#define X_HOME_DIR 1
This would correct a left to right mirroring.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion