Results 1 to 2 of 2
Thread: Flashforge creator pro
-
04-03-2020, 01:35 PM #1
- Join Date
- Apr 2020
- Posts
- 1
Flashforge creator pro
Hello,
I have just upgraded from the Tiertime Up Mini 2, to the Flashforge creator pro.
I am used to changing print beds to accommodate ABS and PLA.
I have had trouble printing to the bed in the FF Creator Pro.
When I print ABS, I had the filament stick pretty significantly to the bed, and had to scrape some off with some alcohol.
When I print PLA, I had it not stick, massive curling.
I have Simplify3d and have tried a couple things, mostly Blue Tape with PLA and not heating the bed. I am having a bit of trouble not getting the bed hot though. Any help, thoughts would be great. Thanks in advance.
-
04-05-2020, 01:44 PM #2
- Join Date
- Apr 2020
- Location
- Middle of the UK
- Posts
- 16
Trouble getting the bed hot? I heat mine to 60ºC for PLA.
Have you tried Pritt Stick/Elmers glue? Worked for me on my CTC printer with a glass bed.
Glue + 60ºC No warping for me with PLA.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help