Results 1 to 1 of 1
-
04-04-2020, 08:50 PM #1
- Join Date
- Apr 2020
- Posts
- 1
filament zig zaging at some point in the print creating poor surface quality
PLA filament that came with a NEW QIDI X plus machinesettings shown belowPictures of issue see belowI tried adjusting retraction setting, print and travel speed and used recommended layer height=0.25, wall line count=2, line width=0.4 walls, bottom layers=2, top layers=3, and in fill =15% still no change in the roughness of filament layers at a particular point in the build ONLY. Very disappointed.20200403_225015.jpg20200403_225022.jpgAnnotation 2020-04-04 183845.jpgAnnotation 2020-04-04 184239.jpg
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help