Results 1 to 10 of 16
Threaded View
-
03-24-2020, 03:41 PM #8
- Join Date
- Mar 2020
- Posts
- 9
Yes, Aardvark, perhaps my expectations were too high. : ) Thanks for your suggestions. I will check out the binderjet hp machine at Shapeways. I have been asked about uploading a 3D model to get a quote from a couple of companies. I have not made the model yet because I don't know which material I'm going to use and I don't know how thick or thin the tolerances are. Does this seem reasonable to you? Find the material then do the 3D model? Also, I was recommended to use the following company that specializes in ceramics. Please take a look and let me know what you think. Are their printers more appropriate than the binderjet printer from Shapeways? Like I said, I don't know anything about 3D printing so I need to rely on the expertise of others. http://www.akronporcelain.com/default.htm
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion