Results 1 to 10 of 16
Threaded View
-
03-23-2020, 02:25 PM #2
well if you were going to print it yourself - use pet-g.
If using a print service - then a commercial nylon and sls (selective laser sintering) would be a good choice as that has almost no design issues.
ie: you don't have to worry about underhangs or overhangs or supports or anything really.
To make it look like stone - paint it :-)
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help