Results 1 to 7 of 7
Threaded View
-
03-20-2020, 11:18 AM #5
- Join Date
- May 2018
- Posts
- 566
Yes, this is the link to the design https://www.thingiverse.com/thing:957958 Board base is PLA and the tiles are all the wood filament. Also made jigs for sanding the tiles and a pin cutter to cut all the tiny filament pins.. Also made the box out of good old wood scraps.. :-)
Printer will print perfect...
Today, 10:44 AM in Tips, Tricks and Tech Help