Results 1 to 7 of 7
Threaded View
-
03-20-2020, 08:47 AM #5
well if peek won't do the job then you need to switch from fdm to a resin machine.
But even formlabs hi-temp resin is only good to 238c
https://formlabs.com/uk/blog/high-te...y-3d-printing/
You might have to start thinking metal :-)
https://xactmetal.com/xm200c/
Yeah it's a 'little' more expensive - but Oh so COOL !Last edited by curious aardvark; 03-20-2020 at 10:18 AM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help