Results 1 to 3 of 3
-
03-14-2020, 02:40 AM #1
- Join Date
- Mar 2020
- Posts
- 1
Need thermistor specs, cocoon create.
Hi All.Does anyone know the specs for the thermistor in the early Cocoon Create.Tried a couple from eBay and still getting fault. Temp display jump to Def/215.Problem started with printer loosing power halfway through longish print (sometimes). thermistor read open circuit and can't see any info on the thing, maybe my eyes?No printer for 3 weeks now, getting withdrawal's.Any pointers appreciated. Roy.
-
12-06-2020, 06:30 AM #2
- Join Date
- Dec 2020
- Posts
- 1
hey. have you been able to fix the problem?
just installed a new extruder and im now having the same def/215 problem.
-
12-06-2020, 07:00 AM #3
Read an article that "The Wanhao Duplicator i3 Mini & rebrands like the Cocoon Create"
https://github.com/andrivet/ADVi3pp
ADVi3++ is a fork of the Marlin Firmware for the Wanhao Duplicator i3 Plus (and its clones: Monoprice Maker Select Plus, Cocoon Create, ...).
It includes both Marlin itself and screens for the LCD Panel.
and suggest using "1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)"
This is untested by myself FYI did a search on the WWW and came up with this read the article,
Remember before flashing new firmware to your 3D Printer make sure you have a backup of your present firmware.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help