Results 1 to 3 of 3
Thread: BCN3D Sigma R19
Threaded View
-
03-01-2020, 01:42 PM #2
- Join Date
- Jun 2014
- Posts
- 885
It is not unusual to have to use a different temperature when using a different color. Consider to raise the nozzle temperature five degrees to see if there is an improvement. If not, increase another five degrees. If necessary, you may have to go even higher, but my Sigma does have different temps from color to color.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help