Results 1 to 1 of 1
Thread: nozzle jamming into bed
-
02-22-2020, 09:19 AM #1
- Join Date
- Feb 2020
- Posts
- 1
nozzle jamming into bed
I am new to 3d so please bear with me.I have a creality cr-10s pro and have made one print,the second print went bad,deposited a blob of filament on the print and now the nozzle jams into the bed so much it flexes the gantry and is putting a hole in the bed.I tried a third print which came out fine except for the nozzle jamming the bed.Any help would be appreciated.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion