Results 1 to 10 of 16
Hybrid View
-
02-20-2020, 07:21 AM #1
well if I was going for a big cheap i3 - the adimlab gantry pro 3d.
https://www.amazon.com/ADIMLab-Assem...s%2C311&sr=8-5
It's the only one I know of that has all the critical prusa I3 design components.
1) direct drive extruder
2) bed side support rails
3) dual z-axis motors
Personally those are the main points I loook for in an i3.
-
02-20-2020, 07:38 AM #2
ADIMLab Updated Gantry Pro 3D Printer
As I look around an see that most of the 3D Printers with a large print area are all going to a single Y-Axis monorail support.
Y-Axis monorail support have a lot to be desired causing more problems than are worth, will be agreeing with curious aardvark choice.
-
04-26-2020, 11:38 PM #3
- Join Date
- Feb 2020
- Posts
- 2
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help