Results 1 to 10 of 10
Thread: Begginer, need advice
Threaded View
-
02-15-2020, 04:15 AM #6
You can also try to reduce speed for the first layer. Most slicers have this options, so try to print the first layer at 25mm/s for example and the rest at 50mm/s. Also, if you have trouble getting smaller parts, you can try to print a huge rectangle outline (some 2 perimeters) to better see where the bed
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion