Close



Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18
  1. #11
    Staff Engineer
    Join Date
    Jul 2016
    Location
    South Florida, USA
    Posts
    1,244
    Add AutoWiz on Facebook
    Well in the face of building a cnc plasma cutting table, I can maybe just buy a cheap one. I mean they aren't that bad. And if I supply my own plasma cutting tool, they are even cheaper. What do you guys think of this: https://www.youtube.com/watch?v=fdsCEx_YaJk&t=

  2. #12
    Staff Engineer
    Join Date
    Jul 2016
    Location
    South Florida, USA
    Posts
    1,244
    Add AutoWiz on Facebook
    The only thing holding me back at this time is a place to put this. Or i would already have it: https://store.langmuirsystems.com/pr...BoCxDMQAvD_BwE

  3. #13
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,801
    looks good :-)

    Seems weird only having the gantry supported at the one end - but guess it's not a problem.

    But for under $2000 - with the extras, seems like a good buy to me.

  4. #14
    Staff Engineer
    Join Date
    Jul 2016
    Location
    South Florida, USA
    Posts
    1,244
    Add AutoWiz on Facebook
    I need a sponsor. Or a silent investor. Or even friends that live close by and share in my interests and visions that can share in the cost. And i can find the freedom in fabrication that i so desperately seek. Have you seen this man's youtube channel, CA? I can't get enough of this Colin Furze. I can only dream of being so free to create: https://www.youtube.com/watch?v=QT8QkEK0X8U&t=

  5. #15
    Staff Engineer
    Join Date
    Jul 2016
    Location
    South Florida, USA
    Posts
    1,244
    Add AutoWiz on Facebook
    In fact the very first project I have planned for this cutting and welding cart is this inset metal brake from this video right here: https://www.youtube.com/watch?v=Ggy1DHwAh_0

  6. #16
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,801
    you are aware of what you do for a living, right ?

    How is fabrication equipment not both a genuine business expense and a valid piece of cost reducing equipment.

    Now what you do with that equipment out of hours - that's your business :-)

  7. #17
    Staff Engineer
    Join Date
    Jul 2016
    Location
    South Florida, USA
    Posts
    1,244
    Add AutoWiz on Facebook
    I cut out this plate with my new plasma cutter. Using a straightedge as a guide I can make nice clean and straight cuts.. Then I drilled some holes, tossed on some paint and began mounting fuses and relays.. And here is the end result mounted and grafted into a 1965 Chevrolet Corvette..

  8. #18
    Staff Engineer
    Join Date
    Jul 2016
    Location
    South Florida, USA
    Posts
    1,244
    Add AutoWiz on Facebook
    That answer depends greatly on your definition of 'good'. If by good you mean learn how to prep your metals, attach a ground strap within a foot of your welding area, and get good penetration with a MIG so you can get a job done, then maybe not too long. Definitely less if you are used to soldering as it is very much the same process just scaled up a bit. If you want to be good enough to make the pretty welds we all love to look at on social media this can take a while and requires lots of practice like playing a band instrument. And if you want all of your welds to pass X-ray tests then you should have a bunch of experience laying the pretty welds. One of my first jobs in the automotive industry was at a Midas muffler shop 20 years ago, now. There I learned to weld and also to use a pipe bender. And today I can make stuff like this: https://www.digitalcorvettes.com/thr.../#post-3085545 . And this: https://www.digitalcorvettes.com/thr.../#post-3441096 . And also this: https://www.superchargerforums.com/t...ring-gto.3135/ . Or even this: https://www.superchargerforums.com/t...n-a-7-0l.3130/ .

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •