Results 1 to 4 of 4
Thread: Spacing between moving parts
Threaded View
-
02-10-2020, 01:18 PM #3
what fred says. Big threads print much better than small ones.
But also - yeah if you go for the 0.25 mm nozzle then a .25-0.3mm gap should work well.
You'll piss people off as the print will take a VERY LONG time.
I've printed fidget cubes with my 0.25 nozzle on my mini delta. I think I used a 0.3 mm gap for the print in place hinges. Think it was designed with 0.2mm and I added a little extra in the slicer. They print great.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help