Results 1 to 2 of 2
Thread: z axis not responding
-
01-23-2020, 05:41 PM #1
- Join Date
- Jan 2020
- Location
- Kansas
- Posts
- 2
z axis not responding
Hi, my printer (ender pro 3) was working fine until i had a clip to hold the glass plate in the wrong place (blame foggy sick brain on that one) and it got jammed up on the side while the y axis was moving back. the x and y still work fine and it will start printing but the z axis will not respond. it makes no sound or anything when i try to move it via the controls. I had a back up motor so i replaced it and that did not help at all. any idea what my dumb brain is missing? Any and all help would be very much appreciated. Thank you all.
-
01-23-2020, 06:53 PM #2
- Join Date
- Jan 2020
- Location
- Kansas
- Posts
- 2
after multiple trouble shooting things we have decided it is the mother board. So a replacement will be ordered and fingers crossed that is the issue as we think it is.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help