Close



Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1

    Is it worth buying a 3D printer now?

    This is a question that my buddies and I have been discussing. Is it really worth spending hundreds or even thousands of dollars for a 3D printer now, when probably in 1-2 years from now we will be able to purchase hardware that is 3 times better for 1/2 the price? I know technology is always improving, but it seems like for what you get now, it's not really worth the money. However in 1-2 years you will be able to get a fine tuned awesome piece of equipment for probably a few hundred dollars.

    What's your thoughts?

    Jacoby

  2. #2
    I have a printer. Didn't pay much for it, but it's also not very good. You can't keep putting a purchase off because of the fact that things will be better and cheaper in the future. Sure in 1-2 years you will be able to buy what you can get now likely for half the price, but think about all the fun you are missing out on in those 1-2 years. Buy one now, and then in 3 years get a new one. This is probably the most innovative market there is on the planet right now. We will see some crazy things coming out in months, not years.

  3. #3
    Student
    Join Date
    Sep 2013
    Location
    Germany
    Posts
    47
    Hello Jacoby,
    I don't think there is going to be more price drops then in the last three years or so ;-) If you calculate stepper motors, electronics, extruders and so on it's already difficult to beat a kit like the printrbot simple $299 or the Makibox (whenever it will go into mass production...), or the reliability of a PP3DP UP that aren't too expensive either (899-1699$).

    In general, you get what you pay for. A 300 Dollar kit will require a bit of tinkering until you get reliable results; Though you can take a Printrbot and print the parts for a Reprap Prusa for example and re-use a lot of the parts...

    I am glad that I started with the UP as it nearly removed all the technical aspects and printed good from the start.

    Innovation will never stop, and who knows what will be in 6 or 12 years.

    Fact is, that 3d printing works well already.
    The biggest limitation these days is the physical limits of exrtrusion printers, and finding new materials.
    Resin printers promise high resolution prints, but of course every type of printer has it's flaws and benefits, especially when it comes to the materials.

  4. #4
    I agree with Marcus. The prices are going to continue to hover in the $750-$1500 range for the near future. The printers however will become better and easier to use. If you want to hold out, don't do it because of the price. Do it because of the quality.

    Randy

  5. #5
    Staff Engineer LambdaFF's Avatar
    Join Date
    Jan 2014
    Location
    France, Aix en Provence
    Posts
    1,137
    This is the same discussion as computers, phones, ...
    My parents bought a computer in the early 90s. It ran Windows 3.11 . I can't thank them enough for it. I'll do my kids a favor and do the same.

  6. #6
    Engineer-in-Training MysteryAlabaster's Avatar
    Join Date
    Oct 2013
    Location
    New Jersey, USA
    Posts
    337
    Follow MysteryAlabaster On Twitter
    I bought a Makerbot Replicator two, and was a bit disappointed when they announced the Replicator a month later.

    I still think it was worth it though.

  7. #7
    Quote Originally Posted by MysteryAlabaster View Post
    I bought a Makerbot Replicator two, and was a bit disappointed when they announced the Replicator a month later.

    I still think it was worth it though.
    From everything I hear, the Replicator 2 is just as good as the new one. The new one just has some added features like the video recording and the special extruder.

  8. #8
    Engineer-in-Training MysteryAlabaster's Avatar
    Join Date
    Oct 2013
    Location
    New Jersey, USA
    Posts
    337
    Follow MysteryAlabaster On Twitter
    Quote Originally Posted by AbracadabraMan View Post
    The new one just has some added features like the video recording and the special extruder.

    Don't remind me...


    #technophile

  9. #9
    Super Moderator Geoff's Avatar
    Join Date
    Nov 2013
    Location
    NSW, Australia
    Posts
    1,824
    Add Geoff on Thingiverse
    Quote Originally Posted by JacobysOne View Post
    This is a question that my buddies and I have been discussing. Is it really worth spending hundreds or even thousands of dollars for a 3D printer now, when probably in 1-2 years from now we will be able to purchase hardware that is 3 times better for 1/2 the price? I know technology is always improving, but it seems like for what you get now, it's not really worth the money. However in 1-2 years you will be able to get a fine tuned awesome piece of equipment for probably a few hundred dollars.

    What's your thoughts?

    Jacoby
    post thread on 3D printing site and ask if you should by a 3d printer....

    No, they are terrible, worst things ever invented...

  10. #10
    Engineer-in-Training MysteryAlabaster's Avatar
    Join Date
    Oct 2013
    Location
    New Jersey, USA
    Posts
    337
    Follow MysteryAlabaster On Twitter
    Quote Originally Posted by Geoff View Post
    post thread on 3D printing site and ask if you should by a 3d printer....

    No, they are terrible, worst things ever invented...

    I don't even know why I bought one anymore...

    Can I get my money back?

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •