Results 1 to 3 of 3
Thread: Bed will not stick on one side
Threaded View
-
01-21-2020, 12:11 PM #2
I would leave bed at 50C and adjust the nozzle up to about 200C.
My 3D Printer print PLA best at 202C, though had printed for a long time at 196C with really good results.Last edited by Roberts_Clif; 01-21-2020 at 07:19 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help