Results 1 to 9 of 9
Threaded View
-
01-13-2020, 11:03 AM #5
- Join Date
- Jan 2020
- Posts
- 7
Thank you for the quick reply. Our bioprinter we have in our lab currently is set up with a 30G nozzle (ID ~0.15mm), but the FDM printer I use is likely 0.4mm nozzle. I will have to check to be sure. This print does not have to be too scale though, I am printing it using PLA just to model my design that I will eventually print using a custom hydrogel.
I will try your design, hopefully today or at least this week, and let you know.
Thank you for the assistance, it is really appreciated.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion