Results 1 to 8 of 8
Thread: Stepper motor for Ender 2
Threaded View
-
01-12-2020, 01:32 PM #3
- Join Date
- Jan 2020
- Posts
- 2
Thanks for the info.
I did not realise there were 2 different ones fitted.
The motor in question is the E.
Thanks for the info.
I did not realise there were 2 different ones fitted.
The motor in question is the E.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion