Results 1 to 10 of 15
Thread: 3D Printing Newb with Questions
Threaded View
-
01-06-2020, 10:52 AM #4
- Join Date
- Jan 2020
- Posts
- 5
The LCD screen does illuminate and was when it was 'printing'. Apparently the resin that I was using, (Zortrax), only works with Zortrax printers. So I'm going to try a new type of resin and see if it changes anything.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion