Results 1 to 1 of 1
Thread: Anet A8 Jamming Mid-print
-
12-22-2019, 08:22 AM #1
- Join Date
- Dec 2019
- Posts
- 1
Anet A8 Jamming Mid-print
Hello,
I have an Anet A8 that has been working great and I decided I would try to print with PTEG, the first test print I did came out great, it was an hour and a half print which had no problem.
After that I needed to do a 14 hour print, I started it and about 2 hours in the print head was just moving above the failed print with no filament coming out while making a little clicking noise.
After 3 tries I was able to get the print to work but I have not gotten anything to print correctly past the first outline now, I have cleaned the extruder assembly, put new nozzles on, added a dust filter, tried PLA, even turned up the heat to print and still nothing.
If anybody has any ideas to help it would be greatly appreciated.
Thanks
nooby question,sorry
09-24-2024, 12:06 PM in General 3D Printing Discussion