Results 1 to 1 of 1
Thread: Anet A8 Jamming Mid-print
-
12-22-2019, 08:22 AM #1
- Join Date
- Dec 2019
- Posts
- 1
Anet A8 Jamming Mid-print
Hello,
I have an Anet A8 that has been working great and I decided I would try to print with PTEG, the first test print I did came out great, it was an hour and a half print which had no problem.
After that I needed to do a 14 hour print, I started it and about 2 hours in the print head was just moving above the failed print with no filament coming out while making a little clicking noise.
After 3 tries I was able to get the print to work but I have not gotten anything to print correctly past the first outline now, I have cleaned the extruder assembly, put new nozzles on, added a dust filter, tried PLA, even turned up the heat to print and still nothing.
If anybody has any ideas to help it would be greatly appreciated.
Thanks
New Here, don't print but need a...
06-20-2024, 12:18 PM in General 3D Printing Discussion