Results 1 to 5 of 5
Thread: heated bed issue
Threaded View
-
12-20-2019, 07:48 PM #3
- Join Date
- Dec 2019
- Posts
- 5
My Cura 4.3 did not have this option but I found a download to add it.
I will check it tomorrow. It should work as long as the z-adjustment is only in effect while printing and does not stay when the nozzle goes into the home position with the bed cooling down.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help