Results 1 to 5 of 5
Thread: heated bed issue
Threaded View
-
12-20-2019, 07:48 PM #3
- Join Date
- Dec 2019
- Posts
- 5
My Cura 4.3 did not have this option but I found a download to add it.
I will check it tomorrow. It should work as long as the z-adjustment is only in effect while printing and does not stay when the nozzle goes into the home position with the bed cooling down.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion