Results 1 to 10 of 14
Thread: ZCorp310 Printhead Error:1003(0)
Threaded View
-
12-20-2019, 02:42 PM #14
- Join Date
- Jan 2014
- Location
- Oakland, CA
- Posts
- 935
[That's an interesting idea. There is a system that uses stainless steel powder to make "green" forms which are later sintered in a kiln and infused with bronze to produce solid metal objects: https://www.exone.com/en-US/3D-print...al-3d-printers
I'm not sure what it would take to do this in a Zcorp machine, or if it's even possible. But there was a system that Zcorp offered in the past, where the machine was used to print a mold in some kind of refractory powder, into which a low-melting-point metal like zinc was poured. The challenge with this system was adequately removing the excess powder that filled the mold cavity, but it shouldn't be too hard to implement for molds with 2 or more parts.
Andrew Werby
Juxtamorph.com
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion