Results 1 to 4 of 4
Threaded View
-
12-17-2019, 05:55 AM #4
It also will only extrude if set to 0.1 or 1 mm at a time.
basically the control panel features are completely useless.
just use a good slicer and control from usb.
It also will only extrude if set to 0.1 or 1 mm at a time.
basically the control panel features are completely useless.
just use a good slicer and control from usb.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion