Results 1 to 4 of 4
Threaded View
-
12-17-2019, 05:55 AM #4
It also will only extrude if set to 0.1 or 1 mm at a time.
basically the control panel features are completely useless.
just use a good slicer and control from usb.
It also will only extrude if set to 0.1 or 1 mm at a time.
basically the control panel features are completely useless.
just use a good slicer and control from usb.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help