Results 1 to 4 of 4
Thread: bed dropping
Threaded View
-
12-16-2019, 01:42 PM #3
- Join Date
- Dec 2019
- Posts
- 3
After about 6 hours of struggling last night, I finally learned that when you put a file into Cura it doesn't automatically set it down in the best way for printing and you have to rotate it your self. Now my question is . is there a button somewhere to get it automatically sit correctly?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion