Results 1 to 2 of 2
Threaded View
-
12-02-2019, 06:08 AM #2
best 'budget' option is the scan-in-a-box. https://www.scaninabox.com/
next one down is the einscan: https://3dprintboard.com/forumdispla...n-S-3D-scanner
You can buy far more expensive ones, but nothing cheaper is really going to do the job.
It's one area where the industry has pretty much ground to a halt on the budget side of things.
I find that it's a lot quicker and you get more precise parts, by just reverse engineering with digital calipers and openscad.
No scanner will help you replicate a part from a single 2d photo.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion