Results 1 to 3 of 3
Thread: Uneven extrusion
Threaded View
-
11-13-2019, 03:40 AM #3
- Join Date
- May 2019
- Location
- Puglia, Italy
- Posts
- 5
I think the first layer is too thin, so you need to increase the distance between nozzle and bed plate. basically, you have to calibrate better the plate. Try to set a little z offset from the slicer. Otherwise you could buy a 3dtouch.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help