Results 1 to 6 of 6
Threaded View
-
10-12-2019, 07:07 AM #6
When I purchased my 3DP12 it came with a SN04-N Proximity Sensor it was connected to 5 volts.
I have switched to a Omron TL-W3MC2 6-30 volt Proximity Sensor had no problems during my 3 years using it on a 5 volt supply.Last edited by Roberts_Clif; 10-12-2019 at 07:48 AM.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion