Results 1 to 1 of 1
Thread: Problem with overextrusion
-
10-10-2019, 05:04 PM #1
- Join Date
- Oct 2019
- Posts
- 1
Problem with overextrusion
Hello
I have a problem while runing the 0.5mm wall test i needed to set my extrusion multiplier to 1.75 to get the wall thickness to .48 but when i print normally i get overextrusion.
any help?
printing on ender 3 pro
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help