Results 1 to 4 of 4
Threaded View
-
10-04-2019, 04:54 PM #3
With a mainboard change the above process should be repeated for all stepper motors and drivers on your printer and also the heaters (bed & extruder) need to be PID autotuned. And then steps/mm should be verified for all 3 axes and also for the extruder. It is after all a new controller. It knows nothing of your specific machine. Its age, modifications, or level of wear.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion