Results 1 to 7 of 7
Threaded View
-
09-26-2019, 11:30 PM #4
- Join Date
- Sep 2019
- Posts
- 1
New to this too, so shooting in the dark here...
If it's under-extruding sporadically like that then maybe friction somewhere. Possibly in the bowden tube (maybe strings of filament from a change at some point, or a kink in the path), or in the filament coming off the spool (tangled or overlapping on the spool, or getting caught up while pulling off because of a non-direct path).
Because it's happening more frequently when you're staring a new line, it could be in your retraction settings (maybe it's taking too long to get the proper amount of filament back to the nozzle after a retraction > bed movement > feed > new line.) I've found that retraction settings change pretty significantly between filament types, which might explain why you're just now seeing issues, especially if you are using new filament.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help