Results 1 to 10 of 15
Thread: Looking for PETG Tip
Threaded View
-
09-05-2019, 06:16 PM #9
- Join Date
- May 2018
- Posts
- 566
If you can tell me the extrusion width you are using along with the layer height I can post you some stl file to check starting height and extrusion multiplier. Assuming you have a digital caliper to measure down to .0x mm.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)