Been a while since last update on Dollo builds. Progress has been slow, but there's progress.
For the Dollo rebuild and Dollo.2 I did some cable management, actually had a failed print due to loose cable yanking X-endstop free during print and causing X-axis to stop moving (a safety feature I guess?).
Also for Dollo rebuild I got the frame stabilized; I used parts from the old build as much as possible, creating adapter parts as needed.
2019-08-12 18.19.09.jpg 2019-08-12 18.19.13.jpg

For Dollo rebuild, I went bit off the original plan because I was redesigning the extruder I use with Dollo for use with Bondtech gears and the Dollo build was the easiest to test the extruders with. So now the Dollo rebuild has two of these extruders: https://www.thingiverse.com/thing:3813628, with these to add more torque: https://www.thingiverse.com/thing:3091980.
Since I'm using only one hotend, I use this 4x-feeder part: https://www.thingiverse.com/thing:3807101. As the Sbase-board only supports 2 extruders, I can only print with two colors. Filament changes are handled with this post-processing tool: https://github.com/spegelius/filaswitch
The setup seems to work reliably. I'll eventually move the extruders (4 in total) to my Tronxy X5S once I get it updated to 24V.


2019-08-12 18.19.24.jpg2019-08-12 18.20.21.jpg 2019-09-01 15.07.10.jpg