Results 1 to 3 of 3
Thread: Printing With TPU
Threaded View
-
08-22-2019, 05:35 AM #3
225 is nowhere near hot enough for most tpu, and 15mms - depending on what kind of estruder you have - is pretty fast.
For filaflex I think I ended up printing at 250c and 20mms on my i3 - and that's a direct drive !
Also, having your printer upside down, probably isn't helping ;-)
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion