Results 1 to 4 of 4
-
12-13-2018, 07:28 PM #1
- Join Date
- Dec 2018
- Posts
- 2
Is there a way to convert a model to metric with Qidi Tech like Simplify3D does
My model is very small when I bring it in on my laptop. Thank you for the help.
-
12-14-2018, 01:33 PM #2
- Join Date
- Dec 2018
- Posts
- 2
Ok, I loaded my g code from simplify3D that converted my model, into the Qidi software and then saved it on the Qidi thumbdrive and the printer is printing the file. My next thing is to see if the machine will read the pause from the script in Simplify3D and raise and move the head off to the side.
-
08-09-2019, 04:36 PM #3
- Join Date
- Aug 2019
- Posts
- 4
Meshlab is your friend.
-
08-11-2019, 12:22 PM #4
- Join Date
- Aug 2019
- Posts
- 10
are you talking about inches to metric?
I found some models in inches and I just calculated the diff. it was 8.25 inch on the X axis and I just googled "8.25 inch to mm" and typed in the exact answer into qidi
Design not printing solid
09-17-2024, 06:12 AM in 3D Modeling, Design, Scanners