Idea of controlling chamber temperature by adding temperature-controlled exhaust vent

[airscapes]

Every filament I have printed with has its indiviual smells.

Do not know why you can not smell it but they all smell.

https://ultimaker.com/download/13079/SDS%20ABS.pdf

Sorry, what I meant was with the enclosure, the room does not smell.. Of maybe I have become nose blind..

[Roberts_Clif]

Sorry, what I meant was with the enclosure, the room does not smell.. Of maybe I have become nose blind..

You must have a really good enclosure.
My enclosure allows the smell even with the vent fan going an as soon as I open the door of the enclosure the smell increases.
Especially when printing with ABS.

[airscapes]

You must have a really good enclosure.
My enclosure allows the smell even with the vent fan going an as soon as I open the door of the enclosure the smell increases.
Especially when printing with ABS.

No, not really sealed.. probably nose blind ..

[djprinter]

As someone else mentioned, buy a cheap inkbird temperature controller and use it to drive a heating element (I use a cheap hair dryer set to low).

In my setup I also have an exhaust fan hooked to the cool side of the inkbird, in case it gets too hot.