Results 1 to 10 of 14
Threaded View
-
08-06-2019, 02:16 PM #3
- Join Date
- May 2018
- Posts
- 566
I have a home made enclosure with a small heater and an InkBird thermostat. With the thermostat set at 100F the small heater and heated bed keep the enclosure at 100F without external venting. I put the sensor near my rambo board.. probably hotter up on the build platform.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion