Results 1 to 10 of 14
Threaded View
-
08-06-2019, 02:16 PM #3
- Join Date
- May 2018
- Posts
- 566
I have a home made enclosure with a small heater and an InkBird thermostat. With the thermostat set at 100F the small heater and heated bed keep the enclosure at 100F without external venting. I put the sensor near my rambo board.. probably hotter up on the build platform.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help