Results 1 to 4 of 4
Thread: Microcenter (Inland) Petg
Threaded View
-
07-31-2019, 10:11 AM #2
- Join Date
- Jul 2019
- Posts
- 15
I figured it out. I had the nozzle set incorrectly in cura. Fixed that and im back to printing normally.
I figured it out. I had the nozzle set incorrectly in cura. Fixed that and im back to printing normally.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion